We have covered pitched roofs and asphalt shingles on our blog, but as that’s not the only thing we do, I wanted to talk about the difference between a flat roof and a pitched roof – that is additional typical for residential applications. There are obvious differences and not so obvious.

Flat roofs are more common for commercial buildings and, while not as architecturally beautiful as a pitched roof, can also be used for residential buildings. It’s everything inside, what you wish from your roof.

Is a flat roof about to cause intense problems?

First of all, a “flat” might or might not be really flat. Many “flat” roofs are slanted to empty water and become “low Slope” roofs. Many “flat” roofs are literally low diagonal roofs so as to produce evacuation. The manner we tend to live the slope is to live the roof’s rise over twelve inches. If a roof rises one in. over twelve inches, it’s referred to as a one in twelve and it might be a low slope. Anything pitched three and twelve or less is taken into account a low diagonal roof. Pitched roofs are something four and twelve or on top of.

When we roof a “flat” or “Low slope” roof, we tend to use a membrane system to hide it. A membrane system could be a sheet of building material that we tend to install to stay even standing water from leaking into the building. The most common forms of flat roof membrane systems square measure torch-down, single-ply, and built-up. The reason we tend to use a membrane system is that shingles leak too badly on a coffee diagonal roof – even on a three and twelve diagonal roof you will encounter leaking with shingles under extreme conditions.

So, however will we stop roof failure on a flat roof?

Simple. It’s in the installation, inspection, and maintenance. If you’re aware of industrial roofing, you know flat roofs have a bad reputation. They don’t shed water moreover and are additional probably to leak, plus leaks are harder to find.

However, there are ways in which to increase the lifetime of your flat roof. Roofs tend to be the foremost neglected issue regarding any building so we tend to get referred to as to repair one thing that must get replaced. You can help stop this by obtaining regular maintenance on your industrial building roof: inspections once a year. We do a brief review that will be ideal for this kind of repairs.

A good roofing company must be able to apply the most effective product for the stress of the weather and therefore the building. Depending on the building we may use:

EPDM single ply systems (stands for Ethylene Propylene Diene Monomore). This is essentially, like all flat roofing, a big unbroken sheet of water-resistant material – in this case, it’s essentially rubber made from oil and natural gas and it’s black. This type has 15-20 year factory warranties. EPDM roofing – if it’s properly put in and sealed – is extremely smart at handling rain, snow, UV rays, abrasions, ozone, and temperature fluctuations.